No products.
Hydra evo autoclave with printer – 15 litres – 230v
£2 879
Delivery:
11-13 working days
11-13 working days
Out of stock
Description
HYDRA EVO AUTOCLAVE with printer – 15 liter – 230 V
Automatic steam autoclave for the sterilization of unwrapped instruments. Closure system with an operator safety pivot.
Thermodynamic system for the ejecting of the “cool” air locks.
Two sterilization cycles: 121°c and 134°C
Automatic phases of pre-heating, sterilization cycle and drying.
Pre-set non-modificable cycles
All cycles are pre-set at the factory and guarantee perfect and safe sterilization of treated materials. There is no way the operator can manipulate or after the cycles, and this against risks deriving from human error.
Pre-set temperatures
The temperatures set for our autoclave cycles are 134°C and 121°C.
The 134°C cycles are normally used for the sterilization of solid and ferrous materials.
121°C cycles are normally used for sterilization of thermoplastic and delicate materials.
Water tanks
HYDRA EVO is equipped with an internal tank for pure water and another for used water. Each tank is equipped with probes to detect the minimum and maximum water levels.
Fully automatic cycles
All cycles are fully automatic, with all steps managed by the leading-edge computer board with a powerful microprocessor. Each step (vacuum, preheating, exposure time, drying) is automatically monitored, assisted and handled. There is no need for human intervention in cycle management
Safety on the door
Each door is equipped with 2 locks:
– a mechanical one which does not open when pressure is exerted
– a dynamic one, operating with a special form of door seal
Built in printer
Built in printer for the registration of cycles carried out.
Safety devices installed
– certified safety valve
– PED on sterilization chambers
– insulation of the chamber with certified ceramic material
Controls of the autoclave
– control of the water that enters into the chamber
– Safety Thermostat
– Time Control
The sterilization chamber is completely stainless steel AISI 304 and it is heated by a band shaped heating element which grants uniformity of the heat.
Supplied with four aluminium trays and one key for their extraction.
User manual avalab1e in English, French, Italian, Spanish.
Technical details
• Stainless steel chamber: Ø 24.5 x 32 cm
• External size: 51 x 39 x 59 cm (W x H x D)
• Net weight: 54 Kg
• 2 sterllization cycles: 121°C and 134°C
• Operating Voltage: 230 V ± 10% – 50/60 Hz
• Power consumption: 1500 W
• Class N
• Made in Italy
CYCLES NOT WRAPPED 121°C
• Materials:
– Fragile solids
– Rubber solids.
– Glass
– Turbines if indicated by producer
• Sterilization time: 35 min.
• Max Load: 4 Kg (1 Kg load in any tray)
• Working pressure: 1.2 ÷ 1.3 bars
CYCLES NOT WRAPPED 134°C
• Materials:
– Stainless metal solids
– Turbines if indicated by producer
• Sterilization time: 21 min.
• Max Load: 4 Kg (1 Kg load in any tray)
• Working pressure: 2.1 ÷ 2.2 bars
Downloadable files
Questions & Answers
There are no questions yet, be the first to ask something for this product.
Reviews
There are no reviews yet.