The Dualflow© Plus M14 240V is a fast, energy efficient, ecologic, hygienic & stylish hand dryer. It uses a high speed Class F universal brush motor to create an air stream of 410 Km/h that will dry your hands in eight seconds only. It’s elegant, easy maintenance designed and friendly-use. It’s very respectful with the environment thanks to its low power consumption (420 W in the ECO mode).
The Dualflow©plus M14 240V comes as standard with a cartridge that holds an HEPA filter medium that filters suspended solid particles (pollen, dust mites, cigarette smoke, etc.), notably improving the air quality. Furthermore, this cartridge also contains and activated carbon filtering medium that neutralizes odours and absorbs fumes and
gases, helping avoid bad odours.
The inclusion of the Biocote© technology, a silver based antimicrobial agent that is embedded into the key parts of the drying system, inhibits the growth of odour causing and staining microbes, keeping the unit clean and hygienic at all times.
Optionally, and by means of a kit for the connection to the waste pipe, code KITDESM14A, the dualflow® plus can be connected directly to the waste pipe. Thus the emptying of the water tank is eliminated because the water always goes directly to the waste pipe.
The Dualflow©plus M14 240V provides a premium experience in every aspect. Very fast in drying terms (8-15 seconds), very quiet (only 62 dBA on the ECO setting) and respectful with the environment (consumption of only 420 W in the ECO mode). It can be considered a truly money saver hand dryer owing its unique features that allows it to achieve savings of more than 73% compared to other “hands-in” dryers on the market.
The Dualflow©plus M14 240V is certified form third party by the German Laboratory VDE according with the European Safety standards EN60335-1 and EN60335-2-23 and with the European Electromagnetic Compatibility and repealing Directive 89/336/EEC.
General information
- The Dualflow Plus is a fast, energy efficient, ecologic, hygienic & stylish hand dryer.
- “Hands in” model, it has 2 pairs of IR sensors on both sides of the upper covers for instant hand detection
- Maximum air speed 410 Km/h.
- Dries hands in only 8 / 15 seconds.
- Motor power adjustable, allowing electricity consumption to be regulated (between 420 and 1.500W).
- Biocote® antimicrobial and antibacterial protection technology based on silver ions. These ions inhibit the reproduction of micro-organisms in the product throughout its lifetime.
- 30 seconds safety timer.
- Lowest noise level in its category. (62 dBA in ECO mode).
- Suitable for medium and high traffic facilities.
- Easy maintenance.
Components & materials
- M14A: ABS cover, white finish.
- M14AC: ABS cover, satin finish.
- M14AB: ABS cover, black finish.
- COVER: made of high impact ABS.
- BASE PLATE: made of plastic PA6V0.
- MOTOR: high speed class F universal brush motor, adjustable from 19000 to 30000 rpm, allowing electricity consumption and sound pressure to be regulated.
- HEATING ELEMENT: minimum waved wire NiCr heating element of 400W, mounted on a mica frame that incorporates a self-resetable thermal cut-off which disconnect the whole appliance. The heating element can be disconnected by means of an ON/OFF switch.
- HEPA FILTER MEDIA: cartridge that holds an HEPA filter medium that filters suspended solid particles (pollen, dust mites, cigarette smoke, etc.), notably improving the air quality. Furthermore, this cartridge also contains and activated carbon filtering medium that neutralizes odours and absorbs fumes and gases, helping avoid bad odours.
Operation
Place the hands between the air outflow valves, inside the hand dryer. The dryer will start automatically, and go on with no interruption as long as the hands are kept in the detection range of the sensor. Move the hands vertically in order to dry them completely. The appliance will stop 2 seconds after the hands are removed from the airflow.
Technical Specifications:
Voltage | 220- 240 V |
Frequency | 50/60 Hz |
Electrical Isolation | Class I |
Total power | 420 – 1,500 W |
Consumption | 3.2 – 6.4 A |
Motor power | 420 – 1,100 W |
Rpm | 19,000 – 30,000 |
Heating element power | 0 or 400 W (ON/OFF |
Dimensions | 665x320x228 mm |
Weight | 8.3 Kg |
Cover thickness | 3 mm |
Drying time | 8-15 sec |
Effective airflow | 94-165m3/h –1,570-2,750 l/min |
Air velocity | 234 – 410 Km/h |
Air temperature (10 cm distance/21ºC) | 40 OC |
Sound pressure (*) (at 2m) | 62 – 72 dBA |
Protection rating | IPX4 |
Reviews
There are no reviews yet.