Labbmaterial

Burette tube for measuring small amounts of liquid with Schellbach stripe and tap at the side with standard ground (NS) glass connector and cock plug. Volume:         10 ml Scale divisions:       0.02 ml Error limits:    Class B Dimensions 90 x 10 x 0.4 cm

Powder-coated aluminium alloy, 350 g, for vertically attaching rods of up to 13 mm to tabletops.

Shielded patch cord equipped with a BNC plug at one end and a 4-mm-plug at the other end. Specifications: Impedance: 50 Ohm Length: 1 m Dimensions 12 x 4 x 4 cm

Heavy base for holding rods of up to 13 mm in diameter. Made of powder coated cast iron. High : 55 mm. Diam.: 60 mm

Denna produkt är tillverkad i grått gjutjärn och basen används till att montera stående stavar med en diameter på upp till 12 mm och rektangulära plattor med en tjocklek på 10 mm eller 12 mm. Höjd: 47 mm Vikt: 0,5 mm Diameter: 54 mm Kaliber: 12 mm Ø Mått: 8,5 x 7,5 x 7,5 cm

Adjustable duplex tripod base, extremely stable, for holding two rods of up to 16 mm in diameter. Distance between rods 135 mm. Leg length: 185 mm Mass: 1850 g

Adjustable duplex tripod base, extremely stable, for holding two rods of up to 16 mm in diameter. Distance between rods 95 mm. Leg length: 150 mm Mass: 1450 g

Made of grey cast iron, this base is used to mount stand rods with a diameter of up to 12 mm and rectangular plates with a thickness of 12 mm. Height: 56 mmWeight: 0.9 kgDiameter: 64 mmBore: 12 mm Ø

Holding rod with 4-mm connector sockets to accommodate and connect components with two plugs matching a 19-mm or 50-mm grid or conductor loops for verifying the Biot-Savart law. Suitable for both 4-mm laminated plugs as well as 4-mm safety plugs. Max. continuous current:  25 A Diameter of rod:       10 mm Dimensions: 110x20x135 mm3 approx. Weight:          […]

Adjustable duplex tripod base, extremely stable, for holding two rods of 4 up to 15 mm in diameter. Limb length : 195 mm Weight: 1.4 kg

Seventeen maximum-quality patch cords with 4-mm-connectors for all cabling between tubes, power supplies, display units and coils. Wire cross-section: 1 mm² Continuous current: max. 19 A Plug and jack: 4 mm Ø (nickel-plated) Quantity: 3 Length: 75 cm Color: red Connection: jack/safety-plug Quantity: 4 Length: 75 cm Color: blue Connection: plug/plug Quantity: 2 Length: 75 […]

Height adjustable table with continuously variable extension mechanism for raising experiment equipment. May be fixed in place via wing nuts. Maximum load: 40 kg Tabletop: 200×200 mm² Height of table: 70 – 260 mm Weight: 2.3 kg

Adjustable duplex tripod base, extremely stable, for holding two rods of 4 up to 15 mm in diameter. Limb length : 270 mm Weight: 2.6 kg

Height adjustable table with continuously variable extension mechanism for raising experiment equipment. May be fixed in place via wing nuts. Maximum load: 30 kg Tabletop: 320×220 mm² Height of table: 65 – 250 mm Weight: 2.6 kg

Stand equipment for easy, understandable and stable assemblies, e.g. for investigating mechanical oscillations and waves using the sensors from Sensors “Mechanical Oscillations” (1012850 or 1012851). Including SW base plate as non-tilting base to accommodate the stand rods, two double clamps and SW tie bar. The SW tie bar serves as multi-function holder for fitting between […]

Provides a firm base for large and extensive structures, with six clamping positions for stand rods up to 12 mm in diameter. Max. stand area:                  550×280 mm2 Dimensions 55 x 28 cm

Set of fuses, including 105 fast-acting fuses of a high switching capacity and 135 slow-acting fuses of a low switching capacity. Stored in a box. Dimensions: 5 mm diam. x 20 mm Rated voltage: 250 V Type SP: Material: Glass tube Time response: Fast Switching capacity: 1000 A @ 250 V Assortment: 1 A (15 […]

Height adjustable table with continuously variable extension mechanism for raising experiment equipment. May be fixed in place via wing nuts. Maximum load: 50 kg Tabletop: 160×130 mm² Height of table: 60 – 250 mm Weight: 1.2 kg