Galaxy II – ICU bed

SKU: GALAXY-III-ECO
Category
£2 899
Delivery: 67-97 working days 67-97 working days Out of stock
You will be reminded when back to stock Saving subscription...

Tillbehör

Accessories

Medicare 30 – Madrass för IVA sängar och vårdsängar

MEDICARE 30 MATTRESSES: The upper part of the mattress is viscoelastic with HR 50 density (4CM), thermo sensitive open cell. Thanks to its exceptional physical properties it keeps the memory instants after removing the pressure. It perfectly adapts to the body shape and makes a mold of it, avoiding pressure points and distributing lying area, […]

£349 Excluding VAT Delivery: 27-42 working days
When ordering an item that is temporarily out of stock, your order is noted as remaining and sent out as soon as it is available again. Backlogged orders are handled in turn.

Get a callback E-mail us

      Description

      This product is not translated yet

      GALAXY II – Maximum safe working load 250 Kg. Four independent and detachable ABS lying sections.

      Integrated bed extension (±15 cm). Cardiac chair position to make it easier for patients to stay in bed. Electric adjustment for height, sections, Trendelemburg and reverse trendelemburg. Patient handset or embedded controls on side rails (optional). Nurse panel with locking device. CPR position control that allows the backrest to be placed horizontally. Nursing control panel GO security button. Autocontour (11 cm of support / 7 cm of pelvis). Long-lasting rechargeable battery. Coated wheels of 150 mm diameter. Protection bumpers on each corner. ABS base cover. Four sockets for accessories (IV pole, lifting pole, etc.). Mattress retainers. Central braking system and steer. Angle and trendelemburg indicator (on split side rails option). Bilateral accessory holder. 8 hooks for immobilization belts.

      PLATFORM:

      • Epoxy coated steel tube frame.
      • New design for headboard and footboard that improves matress retention. The fixing system to the structure allows detaching them easily without tools.
      • Mattress retainers on both sides to allow a correct lying surface positioning.
      • Complete with supports for accessories (IV drip rod, lifting pole,etc. )
      • Scissor-lift raising system for greater stability and working load up to 250 kg.

      COMFORT:

      • 4 independent and detachable ABS lying sections. Useful surface 100%.
      • 4 independent ABS aide rails in accordance with standard rule EN 60601-2-52 with gas spring assist and one hand operation.Controls integrated on the rails with “GO” button for safety activation, optional (ref.CHV84). The design of the side rails allows protecting the patient in the totality of the lying surface.They have an integrated angle indicator, offering a greater control of visual angulations for backrest plane and trendelemburg/reverse trendelemburg positions.
      • Radiolucent lying platform with optional backrest cassette holder (Ref.CHV26)  that allows the extraction of the tray without articulating the backrest.
      • Integrated bed extension (± 20 cm) with sliding linen holder and nurse panel storing location.
      • Double automatic anti-decubitus regression system to allow a trunk plane regression (11 cm) and leg regression (7cm). The double auto-regression system leaves a clear space for legs and gluteus up to 18 cm. By doing so, the double auto-regression system allows a protection against bedsore.

      HANDLING:

      • Sections, height and trendelemburg/reverse trendelemburg adjustment accomplished by low tension electric motors, complying with EN 60601-1.
      • Automatic stop of the backrest to 30º to improve pulmonary ventilation.
      • Independent foot angle from knee angle by mechanical activation of 5 positions providing a greater ergonomics.
      • Cardiac chair position to provide a more comfortable patient stay.
      • Exit position button, that easies the patient to leave the bed when lowering the height and feet section until its minimum position, remaining the back up to 70º.
      • Centralized braking system and steering facility. Double plastic covered anti-static castors  Ø150 mm that allow a better mobility of the product when it is subjected to heavy loads. Control with pictograms for an easy use.
      • Nurse control panel is much more than a simple bed supervisor functions and movements.
      • It is a system that incorporates all the predetermined functions of bed movement that may require by the hospital nurse and health operators.
      • Some of the most important and innovative functions are:
      • Battery charge indicator.
      • Signal indicator when the bed is connected to the power supply
      • Locked functions indicator
      • Emergency trendelemburg activation
      • CRP emergency activation
      • Cardiac chair position
      • Examination position
      • Trendelemburg/reverse trendelemburg position
      • 200-cycle gel battery in a continuous use.

      SECURITY:

      • Double led safety positioning light (green color to indicate minimum height, red when it exceeds minimum safety height), optional, (ref,CHV28).
      • Thermoplastic undercarriage cover to protect the bed mechanisms and to allow an easy cleaning.
      • Quick emergency release backrest dropping system in the event of electrical or battery back-up failure.
      • Anti-trapping systems with automatic motor switch off in the event of detecting any obstacle.
      • Height adjustment actuator fall-preventer in case of failure.

       Electrical features:

      • Power Supply: 120-230 V  50-60 H z.
      • Maximum current intake: 1.6A, 370 Volt.
      • Liquid ingress protection indicator: IPX4
      • Class protection: Class II.
      • Electric shock protection: Type B.

      Technical data:

      • External dimensions: 2100 x 940 mm.
      • Patient surface: 2000 x 850 mm.
      • Height adjustment: 425 to 740 mm.
      • Backrest tilting: 70º
      • Legrest tilting: 30º
      • Trendelemburg/reverse tredelemburg: 14º/14º
      • Maximum working load: 250kg.
      • Weight without accessories: 150kg.
      • All products manufactured by Medisa comply with the directive 2007/47/CEE concerning medical devices (Annex I y Annex VII).
      • All processes have been evaluated and certified by standard requirements UNE-EN ISO 9001:2008 about Quality Management System and the standard UNE-EN ISO 14001:2004 of Enviroment Management System.
      • Medisa products are compliant the following standards:
      • IEC 60601-1
      • IEC 60601-1-2
      • IEC 60601-2-52
      • Certified by Bureau Veritas.
      • CERTIFICATES Nº ES047196-1 / ES047195-1
      • Scope: design, manufacturing, marketing, technical assistance for hospital beds and chairs.

      Downloadable files

      Reviews (0)

      Reviews

      There are no reviews yet.

      Be the first to review “Galaxy II – ICU bed”

      Questions & Answers

      There are no questions yet, be the first to ask something for this product.

      Ask a question!

      Send me a notification for each new answer.
    • Contact us

      Need help? Feel free to contact us by telephone, e-mail or by our live chat!