Voltea – Advanced hospital bed with side-tilt and scale

SKU: VOLTEA
Category
From: £5 909
Delivery: 27-42 working days 27-42 working days Out of stock
Show alternatives
You will be reminded when back to stock Saving subscription...
Clear
When ordering an item that is temporarily out of stock, your order is noted as remaining and sent out as soon as it is available again. Backlogged orders are handled in turn.

Get a callback E-mail us

      Description

      This product is not translated yet

      Bed with lateral tilting model VOLTEA totally electric with column system. Maximum load allowed: 250 kg. Four independent ABS lying sections. Bed extension (± 20 cm) with linen sliding support and nurse control box storing location. Optional controls integrated on side rails or patient control command. Nursing control panel. GO Security button. Independent foot angle from knee angle by mechanical activation, providing greater ergonomics. Autocontour (11 cm backrest / 7 cm pelvis). Position of cardiac chair to facilitate patients stay. Lateral tilting position to prevent possible complications (pressure ulcers, circulatory disorders, ..). Also to transfer from the bed to the operating table or transfer table, and cleaning of patients. Height, Trendelemburg and antitrendelemburg adjusted by electric column drive. Rechargeable long- life battery. Plastic coated 150 mm diameter wheels. Protection bumpers. Base cover in ABS. Four sockets for IV pole and lifting pole. Cable holder. Mattress stops. Central braking system and steer. Angle indicator for backrest and TR / ATR. Bilateral accessory holder. 8 hooks for straps.

      PLATFORM:

      • Epoxy coated steel tube frame.
      • Head and footboard easy to assemble without tools.Their ergomic desing prevents movements on mattress.
      • Complete with supports for accessories (IV drip rod, lifting pole,etc).
      • Mattress retainers on both sides to allow a correct lying surface positioning.
      • Two columns with  6  rods raising system for greater stability in any position and working load up to 250kg.
      • Complete with supports for accessories (IV drip rod, lifting pole, etc).

      COMFORT:

      • 4 independent and detachable ABS lying sections. Useful surface 100%.
      • 4 independent ABS siderails in accordance with standard rule EN 60601-2-52. Embedded buttons on side rail with “GO” safety activation device. The design of the side rails allows a safety exit . They include an embedded indicator for angles.
      • Bed extension (±20 cm) with sliding linen holder and nurse control box storing location.
      • Optional: radiolucent lying platform on backrest with cassette holder (Ref.CHV26).
      • Double automatic anti-decubitus regression system.This mechanism allows, while positioning the bach and leg, to separate the pelvic section more than 18 cm to protect against bedsores.
      • Lateral tilting position to reduce the pressure shores risk.

      HANDLING:

      • Sections and height adjustment accomplished by low tension electric motors, in compliance with standard rule EN 60601-1.
      • Automatic stop of backrest at 30º to improve the position against cardiac arrest.
      • Independent foot angle from knee angle by mechanical activation, providing greater ergonomics.
      • Cardiac chair position to achieve a more comfortable patient stay.
      • Exit button, which eases the patient to leave the bed by descending bed at its minimum height and leg position, remaining backrest at 30º position.
      • Trendelemburg and reverse trendelemburg (16º) by electrical means.
      • Centralized braking system and steering facility. Double castors of Ø150 mm.
      • 5Th Wheel to allow an easy movement and turna round of the bed through narrow corridors and gates (optional ref. CHV24).
      • Nurse control panel and patient handset with drawings and pictograms for easy use.
      • Nurse control panel with pre-set therapeutic functions (Trendelemburg, CPR, cardiac chair and examination position) and lock-out security facility.
      • Thermoplastic undercarriage cover to protect the bed mechanisms and to allow an easy cleaning.

      SECURITY:

      • Quick emergency release backrest lowering   system in the event of electrical or battery back-up failure.
      • Anti-trapping systems with automatic motor switch off in the event of detecting any obstacle.
      • Height adjustment actuator falls preventer in case of failure.
      •  (optional): scale (ref. CHA31) integrated on bed, with patient exit alarm, memory system, auto-calibration. Minimum weight: 10 kg, maximum weight: 380kg, e=0,5 kg

      Technical data:

      • External dimensions: 2150 x 960 mm.
      • Patient surface: 2000 x 850 mm.
      • Height adjustment: 450 – 750 mm.
      • Backrest tilting: 70 º
      • Legrest tilting: 32º
      • Maximum working load: 250kg.
      • Backrest autoregression plane: 110 mm.
      • Legrest autoregression plane: 60 mm.
      • Trendelemburg/reverse trendelemburg: 16º
      • Tilting: 15º
      • Weight without accessories: 150 kg.

      Electrical features:

      • Power supply: 110-230 V 50-60 Hz
      • Maximum current intake: 1.6A, 370 Volt.
      • Liquid ingress protection indicator: IP54
      • Class protection: Clase II
      • Electric shock protection: Type B
      • All products manufactured by Medisa comply with the directive 2007/47/CEE concerning medical devices (Annex I y Annex VII).
      • All processes have been evaluated and certified by standard requirements UNE-EN ISO 9001:2008 about Quality Management System and the standard UNE-EN ISO 14001:2004 of Enviroment Management System.
      • Medisa products are compliant the following standards:
      • IEC 60601-1
      • IEC 60601-1-2
      • IEC 60601-2-52
      • Certified by Bureau Veritas.
      • CERTIFICATES Nº ES047196-1 / ES047195-1
      • Scope: design, manufacturing, marketing, technical assistance for hospital beds and chairs.

      Downloadable files

      Reviews (0)

      Reviews

      There are no reviews yet.

      Be the first to review “Voltea – Advanced hospital bed with side-tilt and scale”

      Questions & Answers

      There are no questions yet, be the first to ask something for this product.

      Ask a question!

      Send me a notification for each new answer.
      Go back to: Hospital beds Next Product

    • Contact us

      Need help? Feel free to contact us by telephone, e-mail or by our live chat!
      CONTACT DETAILS