Digital force gauge FL-TM

SKU: FL TM

Premium force-measuring device with graphics display for tensile and compressive force measurement, prepared for external measuring cells

Category
£489
Delivery: 11-15 working days 11-15 working days Out of stock
Show alternatives
You will be reminded when back to stock Saving subscription...

Accessories

YKN-01 Matrix needle printer

To print the weights on normal paper, which is ideal for long-term archiving Needle print Paper strip: 44 mm Dimensions housing W×D×H 158×106×40 mm Note: The interface cable is free of charge if you purchase the balance and printer together! max. 16 characters/line Construction Dimensions (W×D×H): 158mm x 106mm x 40mm Material: Plastic Power supply […]

£289 Excluding VAT Delivery: 11-15 working days
Add to basket

911-013 Matrix needle printer for KERN-Balances with Data interface RS-232

To print the weights on normal paper, which is ideal for long-term archiving Needle print Paper strip: width 57 mm Dimensions housing W×D×H 100×180×106 mm Please state your balance model when ordering, so that the printer can be preconfigured in the to suit your balance Accessories: Paper rolls, width 57 mm (10 pieces), max. 40 […]

£419 Excluding VAT Delivery: 11-15 working days
Add to basket

YKB-01N Thermal printer for KERN-Balances with Data interface RS-232

For printing results, recipes etc. or for record keeping of balance adjustment with date and time print Printout with date and time Thermal print Paper strip: Width 112 mm Dimensions housing W×D×H 165×140×50 mm Please state your balance model when ordering, so that the printer can be preconfigured in the to suit your balance Option: […]

£349 Excluding VAT Delivery: 11-15 working days
Add to basket
When ordering an item that is temporarily out of stock, your order is noted as remaining and sent out as soon as it is available again. Backlogged orders are handled in turn.

Get a callback E-mail us

      Description

      This product is not translated yet

      • Premium force-measuring device external measuring cell (measuring cell, tension loops and pressure plates not included with delivery)
      • Adjustable nominal loads: 5 N, 10 N, 25 N, 50 N, 100 N, 250 N, 500 N, 1 kN, 2.5 kN, 5 kN, 10 kN, 20 kN, 50 kN
      • Maximum resolution 2500 d
      • Turnable display with backlight
      • Real time or Peak Hold Mode to observe transcients or capture peaks
      • Metal housing for durable usage in harsh environmental conditions
      • : A bar lights up to show how much of the measuring range is still available
      • Measuring with tolerance range (limit-setting function): Upper and lower limiting can be programmed, in pull and push direction. The process is supported by an acoustic and visual signal
      • Internal for up to 500 measurements
      • Continuous analogue output: Linear voltage signal in relation to the load (-2 – +2 V)
      • Selectable measuring units: N, kN, kg, oz, lb

      STANDARD OPTION
      Peak hold function: capturing a peak value within a measuring process.
      Push and Pull: the measuring device can capture tension and compression forces.
      Memory: Balance contains memories, e.g. for tare weights, weighing data, item data, PLU etc.
      Data interface RS-232: To connect the balance to a printer, PC or network
      USB data interface: To connect the balance to a printer, PC or other peripherals.
      Analog Data Interface
      GLP/ISO log: with weight, date and time. Only with KERN printers, see Accessories
      Weighing units: Can be switched to e.g. nonmetric units at the touch of a key. See balance model.
      Rechargeable battery pack: rechargeable set
      Mains part: mains part integrated in the balance. 230V/50Hz Standard type D, if requested also available in standard GB, AUS or USA.
      Parcel shipment via courier. Ready for dispatch in 1 day
      PC software: to transfer the measurements from the device to a PC.
      DAkkS calibration possible. The time required for DAkkS calibration is specified in the pictogram.
      ISO calibration possible. The time required for ISO calibration is specified in the pictogram.
      Model
      Option
      DAkkS
      Calibration
      Certificate
      (Tension)
      Option
      DAkkS
      Calibration
      Certificate
      (Compression)
      Option
      DAkkS Calibration
      Certificate
      (Tension +
      Co
      Option
      Factory
      calibration
      certificate
      (Tension)
      Option
      Factory
      calibration
      certificate
      (Compressio
      Option
      Factory calibration
      certificate
      (Tension +
      FL TM
      1 ✓
      1 ✓
      1 ✓
      1 ✓
      1 ✓
      1 ✓

      Downloadable files

      Reviews (0)

      Reviews

      There are no reviews yet.

      Be the first to review “Digital force gauge FL-TM”

      Questions & Answers

      There are no questions yet, be the first to ask something for this product.

      Ask a question!

      Send me a notification for each new answer.
      Go back to: Force gauges Next Product

    • Contact us

      Need help? Feel free to contact us by telephone, e-mail or by our live chat!
      CONTACT DETAILS