High frequency electrosurgical equipment suitable to deliver current for monopolar cut and coagulated cut (with different levels of coagulation), bipolar cut and coagulation.
TWIN OPERATIVE ACTIVITY
– two output channels for monopolar cutting
– two independent setting and output channels for the most frequent monopolar coagulation
CONTROLLED CUTTING PROCEDURES
– enhanced cutting current for eschar free incision
– cutting current with selectable coagulating property for bleeding controlled dissection
– low capacitance coupling by slow BLEND current for endoscopic procedures
TWIN CONTROLLED COAGULATION PROCEDURES
– SPEEDY coagulation and DEEP coagulation available to two operators
– SPRAY coagulation by hand switch or foot switch controls
EXTENSIVE BIPOLAR FEATURES
– bipolar cutting current with selectable bleeding control
– slow BLEND cutting current
– automatic Start/Stop coagulation functions
SURGEON AND PATIENT TOTAL SAFETY·
– acceptability of contact impedance between patient body and return electrode continuously monitored by Skin Plate Electronic Control (SPEC)
– H.F. leakage currents continuously monitored
– mains fluctuation automatically compensated before delivery of HF power
PERSONALIZED PROCEDURES
– independent choice of coagulation currents and power levels by each of two operators
– up to 10 procedures can be configured and re-called
EXTENSION DRIVER AND INTERLOCK SIGNALS
– driven output connection to external Argon Plasma unit and Smoke Evacuator unit
AUTOMATIC SELF DIAGNOSIS
– automatic diagnostic control of the complete functionality of electronic unit and connected accessories with coded report of failures
SUITABLE IN:
– OUTPATIENT SURGERY
– GENERAL SURGERY
– PAEDIATRIC SURGERY
– PLASTIC SURGERY
– THORAX SURGERY
– VASCULAR SURGERY
– DERMATOLOGY
– ENDOSCOPY
– GASTROENTEROLOGY
– GYNAECOLOGY
– NEUROSURGERY
– ORTHOPEDICS
– OTORHINOLARINGOLOGY
– PNEUMOLOGY
– UROLOGY
– VETERINARY
Technical details
• Maximum out power monopolar pure CUT: 400 W – 300 Ohm
• Maximum out power monopolar cut-coag CUT80%: 350 W – 300 Ohm
• Maximum out power monopolar cut-coag CUT60%: 250 W – 300 Ohm
• Maximum out power monopolar cut-coag CUT40%: 200 W – 300 Ohm
• Maximum out power monopolar cut ENHANCED: 250 W – 500 OOhm
• Maximum out power monopolar cut-coag BLEND: 250 W – 300 Ohm
• Maximum out power monopolar coag SPEEDY: 120 W – 500 Ohm
• Maximum out power monopolar coag DEEP: 120 W – 200 Ohm
• Maximum out power monopolar coag SPRAY: 100 W – 2000 Ohm
• Maximum out power monopolar coag SPRAY ARGON: 100 W – 2000 Ohm
• Maximum out power bipolar CUT 95 W – 150 Ohm
• Maximum out power bipolar cut-coag CUT80%: 95 W – 150 Ohm
• Maximum out power bipolar cut-coag CUT60%: 95 W – 150 Ohm
• Maximum out power bipolar cut-coag CUT40%: 60 W – 150 Ohm
• Maximum out power bipolar cut-coag BLEND: 90 W – 150 Ohm
• Maximum out power bipolar cut-coag BLEND: 70 W – 100 Ohm
• Working frequency monopolar/bipolar: 425 kHz / 525 kHz
• Patient circuit: F
• Selectable input voltage: 115-230 Vac
• Mains frequency: 50-60 Hz
• Electrical input voltage: 1000 VA
• Size WxHxD: 470 x 150 x 400 mm
• Weight: 17.5 kgs
• Controls: Patient/Plate circuit monitoring, Output power monitoring, Self check control
• Safety: EN60601-1, EN60601-1-2, EN60601-2-2, Electrical Class: I CF, MDD 93/42/EC Class: II b
Accessories included
1 – Power supply cord 5 m
1 – Two-button autoclavable handle (30536)
5 – Two-button cold sterilizable handle (30551)
1 – Cable for flat plate (30559)
5 – Rem disposable ground pads (30493)
2 – HP double Water proof foot switch
3 – Short, general surgery blade electrode 7 cm
3 – Long, general surgery blade electrode 16 cm
3 – Short, general surgery ball electrode Ø 4 mm, 6 cm
1 – Electrode brush
1 – User manual (IT, GB)
1 – Service manual (IT, GB)
Reviews
There are no reviews yet.